Product Introduction:
Mainly used in laboratory battery materials research and development of sample production button battery, capacitor scientific research sealing, can also be used in factories for small batch trial production. Configuration of different molds can also be used for battery disassembly, pole tablet pressing, pressing battery powder and other operations.
Configuration mold:
The standard configuration is available for 20 series buckle batteries. Also can replace part of the mold accessories after packaging 24 series of buckle battery.
Product Features:
* The lower die adopts high-precision positioning ring limit to control the height of the battery package, so as to avoid the damage of the sealing cup if the packaging pressure is too large and unstable.
* The inner ring of the upper die sealing cup is equipped with a screw spring top center mechanism to ensure that the button battery can be pushed out forcefully by twisting the top screw in case the battery is stuck when it is sealed.
* Built-in safety overflow oil valve, the pressure can be adjusted according to the need, and the upper limit of pressure can be set, to prevent the damage caused by excessive pressure caused by misoperation, to ensure the safety of the machine.
* Built-in pressure gauge, can observe and accurately control the sealing pressure.
* Hydraulic drive, the pressure can reach 8T, the battery seal no vibration, no leakage.
* Specially designed hydraulic structure, easy to operate.
* Precision mold design to ensure the sealing molding accurate and reliable, solid steel structure design, stable and safe use.
* Small size, easy to operate, can be placed in the glove box operation.
* Beautiful appearance, easy maintenance with small size, easy operation, accurate molding and other advantages.
Technical parameters:
Hand rocker operation strength | Less than 5kg |
Crimping Pressure | 80～100kg/cm2 , Such as in special circumstances need greater pressure (maximum pressure 200kg/cm2 about 8 tons of pressure) to consult the manufacturer before adjustment |
Material | High strength chromium steel (surface after environmental protection electroplating and spraying treatment never rust) |
Overall Dimensions | 223mm X 170mm X 325mm |
Net Weight | 25kg |
The mold adopts high precision positioning ring limit to control the height of the battery packaging, so as to avoid the unstable packaging pressure, which will lead to the battery seal damage. |
