Product Introduction:
Mainly used for lithium core positive, negative electrode and diaphragm Z - shaped laminate assembly. The position correction and laminating process of human fixture piece and subsequent pole piece are fully automatic, with high laminating efficiency and high precision.
Product Features:
* Coil diaphragm automatic servo constant tension control.
* Diaphragm automatic photoelectric correction control.
* The number of laminated can be automatically controlled according to the preset;
* Compatible design, the battery size change can be realized by adjusting the positioning fixture, the adjustment range is large;
*PLC control, HMI operation, easy to use and maintain;
* Pole piece human tooling piece, automatic positioning, manipulator automatic suction, automatic stacking;
* The left and right movement is controlled by pulse motor, which is accurate and convenient for fine tuning.
Technical parameters:
Stacking mode | Z Stacking |
Aligning Accuracy | ≤ ±0.3mm |
Stackable Size | Min. L35mm *W35mm Max. L200mm*W200mm |
Electrode Thickness | Max.30mm |
Stackable Layers | Max. 500 |
Diaphragm diameter | Max. 250mm |
Separator Roll | 3 inch roll core |
Product Dimensions | L950mm*W750mm*H1050mm |
Package Dimensions | L1200mm×1180mm×1300mm |
Gross weight | 356kg |
Net weight | 285kg |
Working Voltage | Single-phase 220VAC±10% 50Hz/60Hz (110VAC can be customized) |
Power | 0.6kw |
Air source | 0.5~0.8MPa compressed air |
operating environment | The recommended ambient temperature is 25±3 °C, humidity is 30 to 90RH, and there is no vibration or electromagnetic interference |
